rom102 to 10 how to for Bev

http://www.kickinchicken.org/phpBB2/viewtopic.php?t=59093

rom102 to 10 how to for Bev

You'll need a jtag, jkeys, flashedit2.1beta9, the flashedit fs scripts for rom10, nagraedit 4.1 and the rom102to10-8c, 3mtierpatch-0801-8d and one of the dual key patches. (all these files can be found in the essential files forum)

Update your tsop so that you have the latest firmware, then jtag the receiver.

Check to see if it's a good save by loading it in flashedit2.1beta9 and try and open in beginner mode. If it won't allow you to open in beginner mode it's corrupted. Keep doing a read until it allows you to open in beginner mode of flashedit2.1beta9. Most causes of corrupted reads are caused by either poor jtag connections, using pogo pin jtags and a slight movement, poor ground, etc...

Once you get a good read save several copies of it and store in a safe
location.

Then edit one copy in flashedit using the rom10 fs script for your model receiver, you'll also need to edit in the fake boxkeys and ird number.
Change IRD number to: [b]0162B382 (make sure you use these ones)
Change Box Keys to: 87382EC5ACC1047E. [/b](make sure you use these ones)
Click on fix crc.

Then choose your model in script window (remember to use the rom10 version for bev, and apply script and save them in a different location from the originals (somewhere easy to find)

Then choose save virgin eeprom in script window and apply. When asked for the label type all of it in caps and use the label that is located on your ird's board, NOT the tsop, save it in same folder as the modded tsop's.

Then open up jkeys, erase your flash and program with the modded flash
you just created, once that is done, go into eeprom programming and program your eeprom with the virgin eeprom you just created


Then open nagraedit clean your rom 10 a couple of times.

Then open the rom102to10-0801-8c.ep10, test, if no errors, apply.

Open the 3mtierpatch-0801-8d.ep10 patch, change password and test, if no errors, apply.

Then open the dual key patch edit the keys with the newest keys, test, if no errors, apply. Then save an image. After the image is saved, write to card. Then go try.

Do not try to change ird, boxkeys or cam id in nagraedit. Leave it exactly as it is.

If time zones or other things need to be edited do it in notepad, after you have successfully got the rom10 working with the basic fix. It makes it easier for troubleshooting that way.

If all channels ask for a password go into menu and attempt to unlock
system. It will ask for a password, press --> (browse), --> (browse),
--> (browse), --> (browse), then press ok (select button). That should